<center id="eoyiw"><div id="eoyiw"></div></center><center id="eoyiw"></center>
<center id="eoyiw"></center>
<optgroup id="eoyiw"></optgroup> <optgroup id="eoyiw"><div id="eoyiw"></div></optgroup>
<center id="eoyiw"></center><center id="eoyiw"></center>
<code id="eoyiw"></code>
<noscript id="eoyiw"></noscript>

Emerald Value, Price, and Jewelry Information

“The Princess of Carolina,” an untreated, 3.37-ct emerald mined at Hiddenite, North Carolina. Photo courtesy of liveauctioneers.com and Guernsey’s.


Emerald has been synonymous with the color green since ancient times. A fine emerald is a truly breathtaking sight, and this member of the beryl family deserves its placement among the traditional “Big Four” gems along with diamond, ruby, and sapphire.

Emerald Value

Like many stones, the per-carat price of fine quality emerald escalates rapidly with size. For example, a recent price guide lists a fine quality 3-ct Colombian stone as six times more valuable than three equivalent quality 1-ct stones.

Value factors hinge largely on color, with nuances of saturation and hue affecting price to a significant degree. The most desirable color is a slightly bluish green in a medium dark tone with strong to vivid saturation.

gold and emerald ring

A beautiful 1.03-ct oval emerald is framed by gold leaves in this romantic, natural setting. ? CustomMade. Used with permission.

Clarity is important, but inclusions are tolerated more in emeralds than virtually any other gem. Top quality, unenhanced stones (with certification) can bring as much as 50% more in price than treated stones of the same size, color, and clarity.

emerald with inclusions - Brazil

An emerald’s inclusions can impact not only its clarity but also its structural integrity. However, they can also give each emerald a unique appearance. Vintage (1970s) faceted emerald, Brazil. ? Joel E. Arem, PhD, FGA. Used with permission.

For more information on emerald value factors, consult our emerald buying guide,?engagement ring guide, and appraisal guide.

emerald crystal on calcite - Colombia

Emerald crystal on calcite, 4.6 x 3.2 x 2.6 cm, Cosquez Mine, Boyaca Dept., Colombia. ? Rob Lavinsky, www.iRocks.com. Used with permission.

The International Gem Society (IGS) has a list of businesses offering gemstone appraisal services.

Emerald Value via Gem Price Guide

Top origins: Colombian emeralds command premium prices. Recent finds in Ethiopia may also command premium prices. Prices assume colorless clarity enhancement, (no dyes.) Average brilliancy of 40 to 60%. Add up to 20% or deduct to 10% for other cutting. Prices for emerald cuts, round, ovals and pear. Add to 10% for marquis.

Colombian Emeralds

Top Color:?vstbG 5/5; bG 5/5 or 6/5; vslbG 5/5
<0.25 ,500 - ,000 - ,700 - ,100
0.25-0.99 ,000 - ,000 - ,000 - ,000
1.00-1.99 ,000 - ,000 ,000 - ,000 ,200 - ,000
2.00-4.99 ,000 - ,000 - ,000 ,500 - ,000
5.00-7.99 ,000 - ,000 ,000 - ,000 ,000 - ,500
8.00+ ,000 - ,000 ,000 - ,000 ,000 - ,000
Very Good Color: vstbG 6/5; bG 5/5, 4/5 or 6/4; vslbG 5/5, 6/5
<0.25 - ,200 - ,200 -
0.25-0.99 ,200 - ,000 ,300 - ,000 - ,500
1.00-1.99 ,800 - ,500 ,000 - ,500 ,200 - ,000
2.00-4.99 ,000 - ,000 ,800 - ,500 ,500 - ,000
5.00-7.99 ,500 - ,000 ,500 - ,000 ,000 - ,800
8.00+ ,000 - ,000 ,000 - ,000 ,000 - ,500
Good Color: vstbG 4/5, 5/4, 6/4; bG 3/5, 4/4, 5/3, 6/3, 7/4; vslbG 3/5, 4/4, 4/5, 5/3, 6/4; G 4/5, 5/4,5/5, 6/5
<0.25 - - -
0.25-0.99 - ,300 - ,000 -
1.00-1.99 ,500 - ,000 - ,500 -
2.00-4.99 ,500 - ,000 ,500 - ,000 - ,750
5.00-7.99 ,000 - ,000 ,500 - ,500 ,500 - ,000
8.00+ ,000 - ,000 ,000 - ,000 ,800 - ,000
Fair Color: vstbG 3/5, 4/4, 7/4; bG 3/4, 4/3, 7/3; vslbG 3/4, 6/3, 7/3, 7/4; G 3/5, 4/4, 5/3, 6/4
<0.25 - - -
0.25-0.99 - - -
1.00-1.99 - ,200 - -
2.00-4.99 - ,000 - ,250 -
5.00-7.99 - ,500 - ,750 - ,250
8.00+ ,000 - ,000 - ,000 - ,500

Other Emeralds

Top Color: vstbG 5/5; bG 5/5 or 6/5; vslbG 5/5
<0.25 ,000 - ,500 - ,100 -
0.25-0.99 ,200 - ,000 ,000 - ,500 - ,700
1.00-1.99 ,500 - ,000 ,700 - ,500 ,000 - ,000
2.00-4.99 ,000 - ,500 ,000 - ,000 ,750 - ,750
5.00+ ,000 - ,000 ,000 - ,000 ,000 - ,000
Very Good Color: vstbG 6/5; bG 5/5, 4/5 or 6/4; vslbG 5/5, 6/5
<0.25 - - -
0.25-0.99 - ,500 - ,300 - ,000
1.00-1.99 ,250 - ,000 ,300 - ,500 - ,000
2.00-4.99 ,250 - ,000 ,000 - ,000 - ,000
5.00+ ,000 - ,000 ,000 - ,500 ,500 - ,500
Good Color: vstbG 4/5, 5/4, 6/4; bG 3/5, 4/4, 5/3, 6/3, 7/4; vslbG 3/5, 4/4, 4/5, 5/3, 6/4; G 4/5, 5/4,5/5, 6/5
<0.25 - - -
0.25-0.99 - - -
1.00-1.99 - ,000 - ,200 -
2.00-4.99 ,000 - ,500 ,150 - ,300 - ,400
5.00+ ,100 - ,500 ,900 - ,200 ,200 - ,500
Fair Color: vstbG 3/5, 4/4, 7/4; bG 3/4, 4/3, 7/3; vslbG 3/4, 6/3, 7/3, 7/4; G 3/5, 4/4, 5/3, 6/4
<0.25 - - -
0.25-0.99 - - -
1.00-1.99 - - -
2.00-4.99 - ,500 - -
5.00+ - ,000 - ,400 -

Emerald Information

Data Value
Name Emerald
Is a Variety of Beryl
Crystallography Hexagonal
Refractive Index Varies by sources of crystals. 1.569-1.602. See "Identifying Characteristics" below.
Colors Deep to medium green, bluish green.
Hardness 7.5-8
Wearability Good to Poor
Wearability Notes Good to Poor, depending on the integrity of the gem
Fracture Conchoidal, uneven
Birefringence Varies by sources of crystals. 0.004-0.010. See "Identifying Characteristics" below.
Cleavage Indistinct
Dispersion 0.014 (low)
Heat Sensitivity Yes
Luminescence Sometimes green in SW; very seldom weak red, orange in LW. If red fluorescence is seen, the color is visible in the Chelsea filter. Fluorescence is quenched by Fe, as in the South African and Indian emeralds. See "Identifying Characteristics" below.
Luminescence Present Yes
Luminescence Type Fluorescent, UV-Long, UV-Short
Special Care Instructions Emeralds usually have internal fracutres, so clean with warm or room temperature soap and water. Avoid wearing gem where it will get rough treatment.
Absorption Spectrum Very diagnostic. See "Identifying Characteristics" below.
Formula Be3Al2Si6O18 + Cr?(+V)
Pleochroism Blue-green/yellowish-green. ?Rarely, blue/yellowish-green.
Optics Uniaxial (-). ?Refractive indices vary by sources of crystals. ?See "Identifying Characteristics" below.
Optic Sign Uniaxial -
Etymology From the Greek smaragados for "green," through the Latin smaragdus to the Middle English esmeralde.
Occurrence Granitic rocks, especially granite pegmatites. ?Also, schists, metamorphic limestones, and hydrothermal vents.
Inclusions Long, hollow tubes; negative crystals; chrysanthemums. ?Inclusions also vary by source of crystals. ?See "Identifying Characteristics" below.
Luster Vitreous
Specific Gravity 2.68-2.78
Enhancements Oiling, common. (Oils and epoxies are used to fill fractures, which reduces their visibility).
Typical Treatments Fracture/Cavity Filling, Oiling
Transparency Transparent to opaque
Phenomena Chatoyancy (very rare)
Birthstone May
emeralds - Colombia

Emeralds, 3.7 x 2.5 x 1.7 cm (larger crystal 2.5 cm in length), Muzo Mine, Boyaca Dept., Colombia. ? Rob Lavinsky, www.iRocks.com. Used with permission.


Emeralds have fascinated people since ancient times. Not surprisingly, cultures from all over the world have developed a rich folklore around emeralds, and stories of famous emeralds have captivated people for centuries.?Emerald is also the birthstone for May as well as the 20th and 35th wedding anniversary stone.

gold ring with table-cut emerald

Gold and silver ring with diamonds and a table-cut emerald, Germany, mid-18th century. From the collection of the Hallwyl Museum, Stockholm, Sweden. Photo by Helena Bonnevier. Licensed under CC By-SA 3.0.

What Causes Emerald Color?

Emerald is a medium or darker green to blue-green beryl gemstone, in which the green color is derived from impurities of chromium (Cr), vanadium (V), or a combination of both. Before 1963, the definition of emerald was limited to beryls with chromium impurities, but the discovery in Brazil of a large deposit of beryl stones colored green by vanadium led to modification. According to the modern definition, the purity and saturation of the green color of a beryl is what defines an emerald.

Varying amounts of iron (Fe) will affect the color as well. More iron atoms increase the bluish tones.

Are All Green Beryls Emeralds?

light green beryl - Colombia

Green beryl, 1.2 x 1.0 x 0.9 cm, Chivor, Boyaca Dept., Colombia. ? Rob Lavinsky, www.iRocks.com. Used with permission.

In a situation similar to the division between pink sapphire and ruby, some chromium colored stones of light to medium-light green color are sometimes sold as emeralds though they could be considered green beryls. Emeralds should have a medium to dark primary green hue. (Editor’s note: Some gemologists, including Dr. Joel Arem, define emerald strictly as beryl that contains chromium and consider beryls colored green because of vanadium to be?simply green beryls).

Do Emerald Colors Vary by Locality?

Geological conditions in Colombia produced exactly the slightly bluish-green shade and strong saturation that make stones from that locale the epitome of the variety.

Emeralds from the Muzo and Chivor mines in Colombia can be distinguished in a general way. Muzo material is yellowish green, whereas that from Chivor is blue-green. ?(It sometimes takes a trained eye to see the distinction in color, however).

Faceted emeralds - Colombia

Emeralds, Colombia (1.06, 2.02, 0.95 cts). Photo ? Joel E. Arem, PhD, FGA. Used with permission.

Emeralds from Zambia may also display an unusual blue tone, with blue-green/yellow green pleochroism, due to their high iron content (0.73%). Zambian crystals may be intensely color zoned, with near colorless cores and dark green rims, almost like watermelon tourmaline.

emerald - Zambia

Oval-cut emerald, 1.85 cts, Zambia. Photo courtesy of liveauctioneers.com and Jasper52.

Recently discovered emeralds from Itabira, Minas Gerais, Brazil, rival the best Colombian stones in quality. They are typically light bluish green down the?c-axis.

Where are the Major Sources of Emeralds?

The center of world emerald mining is in South America, with Colombia and Brazil as major producers.

The Egyptian mines that supplied Cleopatra’s passion have long since been played out. However, today the African continent is second only to South America in production, with mines in Zambia, Zimbabwe, Madagascar, and Nigeria. Each of these locales typically produces a certain color, size, and clarity. Since 2016, Ethiopia has also produced some high-quality emeralds with grass green to blue-green colors that don’t need oil treatments.

emerald - Ethiopia

The “emerald cut” design is well-suited to enhancing gemstone colors, like those of its namesake. Emerald-cut emerald, 4.44 cts, Ethiopia. Photo courtesy of liveauctioneers.com and Zain Gems and Jewels Co., Ltd.

Other notable sources of emeralds include Afghanistan and China.

As for consumers, the United States and Japan together purchase more than 75% of the world’s cut emeralds.

emeralds on matrix - Afghanistan

Emeralds on matrix, 4.0 x 3.4 x 2.0 cm, Panjshir Valley, Parwan Province, Northern Afghanistan. ? Rob Lavinsky, www.iRocks.com. Used with permission.

Identifying Characteristics

The physical and optical properties of emeralds may help gemologists distinguish natural from synthetic stones and even identify the sources of mined stones.

Absorption Spectrum

The absorption spectrum of emerald is very distinctive, with?fine lines in the red, weak ones in the blue, and broad absorption in the violet;?e?and?o?have different characteristics:

  • o:?6830/6800?doublet plus 6370 line; broad band 6250-5800; narrow lines 4775 and 4725.
  • e:?6830/6800 doublet, very strong; no 6370 line, but see diffuse 6620 and 6460 lines; broad absorption band is weaker, no lines visible in the blue at all.

Some Zambian emeralds contain Fe and display the spectral lines of aquamarine as well as emerald. Pleochroism in these gems is also distinctive: blue/yellowish-green.

Vanadium-bearing emeralds may show a weak band at 6100.


The luminescence of emerald is very distinctive and can help positively identify an emerald.

  • Natural, untreated emeralds: Usually inert, weak orange red to red, ultraviolet (UV) longwave (LW) and shortwave (SW).
  • Oil in emeralds: Moderate yellow green LW, weaker in SW.

Iron in emeralds may quench fluorescence.

See the “Synthetics” section for information on luminescence in lab-created emeralds.

Emeralds on matrix, Muzo mine, Colombia, under normal light and UV LW light. Photos?by Géry Parent.?Public Domain.


Emeralds can feature many kinds of internal fractures and?inclusions. The evocative term jardin, French for “garden,” is used to refer to this variety. The types of inclusions in emeralds can help identify their sources. See the tables below.

For inclusions of synthetic emeralds, see the “Synthetics” section below.

Emerald Properties by Source


Locality Occurrence o e Birefringence SG Notes
Poona schists 1.578-1.579 1.572 0.005-0.007 2.69-2.70
Emmaville pegmatite 1.575 1.57 0.005 2.68

Inclusions: Biotite (abundantly); actinolite; calcite; some 3-phase inclusions seen, tubes, “daggers,” fluorite.


Locality Occurrence o e Birefringence SG Notes
Habachthal biotite schist 1.591 1.584 0.007 2.74
(unspecified) 1.582 1.576 0.006 2.73

Inclusions (Habachthal): Straight, broad-stemmed tremolite rods; biotite, rounded mica plates; tourmaline; epidote; sphene; apatite; rutile.

emeralds on matrix - Austria

Emeralds on biotite schist matrix, 7.4 x 4.6 x 3.3 cm (largest crystal 1.5 cm), Habach valley, Hohe Tauern Mts, Salzburg, Austria. ? Rob Lavinsky, www.iRocks.com. Used with permission.


Locality Occurrence o e Birefringence SG Notes
Anagé 1.584 1.576 0.008 2.80
Brumado 1.579 1.573 0.005-0.006 2.68
Carnaiba mica schist 1.588 1.583 0.006-0.007 2.72
Salininha 1.589 1.583 0.006 2.71
Minas Gerais (var.) 1.578-1.581 1.572-1.576 0.006-0.009 2.71-2.73
Goiás?(Sta. Terezinha) in talc and biotite schist 1.588-1.593 1.580-1.586 0.007-0.008 2.70-2.76 bluish green


cluster of emeralds - Brazil

Cluster of emeralds, 2.2 x 2.0 x 1.1 cm, Bahia, Northeast Region, Brazil. ? Rob Lavinsky, www.iRocks.com. Used with permission.


Locality Occurrence o e Birefringence SG Notes
Chivor Mine cracks in dark schist 1.577-1.579 1.570-1.571 0.005-0.006 2.69 blue-green
Muzo Mine calcite veins in dark shale 1.580-1.584 1.570-1.578 0.005-0.006 2.70-2.71 yellow-green
Gachalá Mine 1.576 1.57 0.006 2.70
Borbur Mine 1.576 1.569 0.007 2.70
Trapiche emerald in biotite 1.583 1.577 0.006 2.70


  • Chivor Mine:?3-phase inclusions; pyrite; albite.
  • Muzo Mine:?3-phase inclusions; parisite crystals (only?known from Muzo mine), in yellow-brown prisms; calcite rhombs.
  • Borbur Mine:?3-phase inclusions.
  • Gachalá?Mine: parallel growth bands, needlelike growth tubes; 3-phase inclusions: albite, pyrite; 6-sided cleavage cracks.
  • Coscuez Mine:?2-and 3-phase inclusions, pyrite, albite, quartz, partially-healed fractures.
trapiche emerald - Colombia

Rare trapiche emeralds have a “spoked wheel” appearance and form when impurities outline an emerald’s hexagonal crystal structure. Oval cabochon-cut trapiche emerald, 3.40 cts, 9.3 x 7.9 mm, Colombia. ? The Gem Trader. Used with permission.


Locality Occurrence o e Birefringence SG Notes
poor quality 1.589 1.582 0.007 2.70


Locality Occurrence o e Birefringence SG Notes
Ajmer 1.595 1.585 0.007-0.010 2.74
(unspecified) in biotite schist 1.593 1.585 0.007 2.73

Inclusions: Oblong cavities parallel to long crystal axis, with gas bubbles; biotite crystals parallel to basal plane; fuchsite, 2-phase inclusions; apatite crystals; groups of negative twin crystals with comma shape.


Locality Occurrence o e Birefringence SG Notes
Ankadilalana Mine mica schist 1.589-1.591 1.581-1.585 0.007 2.73


Locality Occurrence o e Birefringence SG Notes
Morrua 1.593 1.585 0.008 2.73


Locality Occurrence o e Birefringence SG Notes
Eidsvoll in granite 1.590-1.591 1.583-1.584 0.007 2.68-2.76

Inclusions: Mossy inclusions; also interconnected tubes that make crystals appear turbid.


Locality Occurrence o e Birefringence SG Notes
Mingora 1.596 1.588 0.007 2.78
Bucha talc-quartz-carbonate enclosed in ultramafic 1.6 1.59 0.010
Swat (general) in metamorphics 1.595-1.600 1.588-1.593 0.007 2.75-2.78

Inclusions: 2-phase inclusions; thin films; some liquid inclusions, few mineral crystals.

emerald - Swat, Pakistan

1.50-ct emerald from Swat, Pakistan. Photo courtesy of liveauctioneers.com and Jasper52.


Locality Occurrence o e Birefringence SG Notes
Urals biotite-chlorite schists 1.588 1.581 0.006-0.007 2.74

Inclusions: Actinolite crystals, singly or in groups, resembling bamboo cane; mica plates.

emeralds in biotite schist - Russia

Pair of emeralds in biotite schist, 5.0 x 4.8 x 2.9 cm, Tokovaya 2, Emerald mines, Tokovaya river, Malyshevo, Ekaterinburg (Sverdlovsk), Russia. ? Rob Lavinsky, www.iRocks.com. Used with permission.

South Africa

Locality Occurrence o e Birefringence SG Notes
Transvaal, Gravolotte (Cobra Mine, etc.) acid pegmatites and contacting schists 1.593-1.594 1.583-1.586 0.006-0.007 2.75-2.76


  • Cobra Mine: Mica plates and 3-phase inclusions.
  • Transvaal: Brown mica (makes gems dark in color); curved molybdenite crystals.


Locality Occurrence o e Birefringence SG Notes
Lake Manyara in pegmatites and mica schists 1.585 1.578-1.580 0.005-0.006 2.72-2.73 with alexandrite

Inclusions: 2-phase and 3-phase inclusions; square-shaped cavities and tubes; actinolite, mica.

emerald - Lake Manyara, Tanzania

Emerald, Lake Manyara, Tanzania (1.50 cts). Photo ? Joel E. Arem, PhD, FGA. Used with permission.

United States

Locality Occurrence o e Birefringence SG Notes
North Carolina in albite matrix 1.588 1.581 0.007 2.73 fluoresces in LW-UV

Inclusions (North Carolina): Quartz crystals sometimes seen.


Locality Occurrence o e Birefringence SG Notes
Miku in schists 1.589-1.590 1.581-1.582 0.007-0.009 2.74
Mufulira 1.588 1.581 0.007 2.68
Kitwe in schists 1.586 1.58 0.006 2.79
Kafubu 1.602 1.592 0.010 2.77

Inclusions: Biotite (black crystals) as small specks or dots; pinpoints, breadcrumb inclusions; also tourmaline (dravite) and magnetite. Material from?Kitwe?contains: rutile, chrysoberyl, muscovite, apatite, quartz, ilmenite, tourmaline, color zoning, 2-phase inclusions.

cabbed emeralds - Zambia

Cabochon-cut emeralds, average 2.13 cts, Zambia. ? All That Glitters. Used with permission.


Locality Occurrence o e Birefringence SG Notes
Victoria Province 1.576-1.591 1.572-1.585 0.004-0.007 2.67-2.74 with alexandrite
Bubera Province 1.585 1.58 0.005 not gemmy
Shamva Province 1.591 1.584 0.007 not gemmy
Filabusi Province 1.587-1.594 1.583-1.588 0.004
Belinwe Province 1.593-1.594 1.586-1.588 0.005-0.007
Sandawana 1.590-1.596 1.583-1.588 0.004-0.006 2.74-2.75

Occurrence (General): granite pegmatites, cutting schists, also serpentines and fine mica aggregates.

Inclusions: Fine long-curving tremolite needles; also 2-3 phase inclusions, short rods or fine curved fibers; color zoning; garnets; hematite; feldspar; brown mica; negative crystals.

gold ring with table-cut emerald - Zimbabwe

18k gold ring featuring an approximately 0.8-ct, table-cut emerald from Sandawana, Zimbabwe and six brilliant-cut diamonds. Photo courtesy of liveauctioneers.com and Ewbank’s.

Emerald Simulants

imitation glass emerald

A glass imitation of emerald. Photo by Michelle Tribe. Licensed under CC By 2.0.

Emerald simulants or imitations often encountered in the marketplace include: glass, yttrium aluminum garnet (YAG), green cubic zirconia (CZ), and assembled triplets of beryl as well as synthetic spinel. Although these pieces may resemble emeralds, their optical and physical properties differ notably from those of emeralds.

Of course, other natural green gemstones may also resemble emeralds and may be misidentified?— either accidentally or deliberately —?as emeralds.?Since emeralds are among the most popular and expensive gemstones in the world, unscrupulous vendors may associate the name “emerald” to other less popular green gems in order to drum up consumer interest, such as calling green fluorite “African emerald” or chrome sphene “Mexican emerald.” However, gemologists can usually readily distinguish emeralds from other gemstones.

Read our article on false or misleading gem names for more examples.

Synthetic Emeralds

Gilson synthetic emerald crystal

A very large Gilson emerald crystal (437 cts, approximately 60 x 40 x 10 mm). Photo ? Joel E. Arem, PhD, FGA. Used with permission.

Two major processes, the hydrothermal and flux methods, can produce synthetic or lab-created emeralds.

If you’ve seen and priced synthetic emeralds, you may wonder why they’re so costly compared to other synthetics, such as synthetic sapphires. Both the hydrothermal and flux methods of production require costly equipment and are energy intensive. They take a long time to produce emeralds and have a low yield of cuttable gems.

For more information on the history of synthetic gemstones in general as well as the specific development of lab-created emeralds and the particular proprietary process noted below, consult our 5-part synthetic gemstone guide.

For more information on distinguishing synthetic emeralds from natural stones as well as identifying specific manufacturing processes, consult this article on lab-made emeralds.

Comparison of Natural and Synthetic Emerald Properties

Synthetic emeralds typically have slightly lower refractive indices (RI) and birefringence than do natural stones.

Most emerald synthetics have the same absorption spectrum as?natural emeralds. Gilson type III may have a line at 4270.

Natural Flux Hydrothermal Lechleitner Overgrowths
o 1.572-1600 1.560-1.563 1.566-1.576 1.578-1.605
e 1.570-1.593 1.563-1.566 1.571-1.576 1.570-1.599
Birefringence 0.005-0.009 0.003-0.005 0.005-0.007 0.005-0.010
Specific Gravity 2.68-2.78 (usually over 2.69) 2.65-2.67 2.67-2.71

Flux-Grown Characteristics

Flux-grown emerald doesn’t show the infrared spectrum characteristics of water in the beryl structure. This spectrum is characteristic only of natural and hydrothermal synthetic emeralds. Flux-grown emeralds typically have relatively low RIs and specific gravity values (SG) and show strong red fluorescence in UV.

Trace Elements

Chlorine appears to be a diagnostic trace element found only in hydrothermal synthetics. Other trace elements overlap with natural material and are therefore not diagnostic. Natural emeralds contain Na, Mg, and Fe in significantly higher amounts (more than 0.1%) than synthetic emeralds but contain lower amounts (less than 18%) of silica and alumina.

Luminescence in Synthetic Emeralds

  • Chatham flux synthetic emerald: Weak to moderate red-brown and red, LW and SW.
  • Gilson flux synthetic emerald: Usually weak to moderate red, stronger in LW, some weak to moderate yellow, yellow green, or orange,?LW and SW. Dull red in X-ray.
  • Gilson type III synthetic emerald: Inert.
  • Zerfass: Weak red in LW.
  • Regency (Linde): Bright red in LW.
  • Biron: Inert.
  • Crystal Research: Inert.
  • Lenix: Red in LW.
  • Seiko: Green (distinctive) in LW.
  • Russian synthetic emerald: Weak to moderate orangish red LW, inert SW.
  • Hydrothermal synthetic emerald: Moderate to strong red, LW and SW, some inert.

Chatham stones transmit UV to 2300, whereas natural emeralds are opaque below 3000.

Regency emerald is the material formerly made by Linde, manufactured under license by Vacuum Ventures, Inc. This material is therefore identical with the Linde product.

Regency synthetic emeralds

Regency emeralds (gem, 2.88 cts; crystal, 20.25 cts). Photo ? Joel E. Arem, PhD, FGA. Used with permission.

Inclusions of Synthetic Emeralds

Some of the first lab-created emeralds on the market weren’t convincing because they were so clean. However, the sophistication of today’s consumer has led to a trend toward more natural-looking synthetics with inclusions. Although this improves their salability, it makes a little more difficult for gemologists and appraisers to prove natural origin. Fortunately, the types of inclusions in synthetic emeralds can help gemologists verify either a mined or synthetic origin.

Flux-Grown Inclusions

Flux grown synthetic emeralds may contain flux, platinum crystals, (metallic) phenakite crystals (colorless and low relief) and show a Venetian blind effect.

  • Gilson: Veil-like feathers.
  • Lenix: Flux particles; 2-phase inclusions resembling feathers.
  • Russian synthetics: Flux-void fillings and healed fractures (orangey brown).
  • Seiko: Flux inclusions, concentrated in a plane between color zones; strong color zoning; Starburst inclusions; dust-like flux, seemingly at surface of gem but actually inside the stone.
  • I.G. Farben/Zerfass: Phenakite inclusions; profuse twisted veils.
  • Chatham: Fingerprint veils; phenakite crystals; flux inclusions.
Hydrothermal Inclusions
  • Regency (Linde): Portions of seed crystals; phenakite crystals; dagger-like inclusions (nail heads); flattened healed cracks, with 2-phase inclusions visible (high magnification); pointed hollow tubes.
  • Lechleitner: Parallel color bands; dust-like particles; wedge-shaped 2-phase inclusions parallel to growth direction; octagonal gold crystals.
  • Biron: Fingerprints; veils; fractures; nail heads with liquid and gas; large 2-phase inclusions; white comet tails; gold particles; phenakite; growth features.
  • Crystal Research: 2-phase inclusions; color banding (in early material).
  • Inamori: 2-phase inclusions.

Tabulated Data on Synthetic Emerald

Source e o Birefringence SG
Overgrowth 1.571-1.601 1.571-1.610 0.005-0.010 2.68-2.71
Solid 1.569 1.574 0.005 2.70
Beryl Sandwich 1.566 1.570 0.004 2.68
Regency (Linde) 1.566-1.572 1.571-1.578 0.005-0.006 2.67-2.70
Biron 1.569 1.573 0.004-0.005 2.68-2.71
Crystal Research 1.571-1.575 1.566-1.570 0.005 2.68
Inamori (Kyocera) 1.563 1.568 0.005 2.65-2.70
Gilson 1.558-1.561 1.565-1.575 0.003-0.005 2.65-2.70
Seiko 1.561 1.565 0.004 2.66
Lenix 1.562 1.566 0.004 2.62-2.65
Zerfass 1.555 1.561 0.006 2.66
Russian Synthetics 1.559 1.563 0.004 2.65
Chatham 1.56 1.565 0.003-0.004 2.64-2.66

Lechleitner emerald has a Cr content of approximately 4-10% (weight), with mean RI varying from 1.576-1.605 as the Cr content increases. In contrast, Linde emerald has a Cr content of 0.3-1.2% and a mean RI of 1.568-1.575. Natural emeralds usually have a maximum Cr content below 2%, but the RI also varies with other impurities.

The properties of Seiko (flux-melt) emeralds are reported as similar to those of other synthetics.

gold ring with diamonds and synthetic emeralds

14k gold ring with three round-cut synthetic emeralds and 14 brilliant-cut diamonds. Photo courtesy of liveauctioneers.com and Fortuna Auction.

Emerald Enhancements

Emerald is considered a “Type III” gemstone, which means these gems are virtually always included to some degree. Because of this designation, a clarity grade of “Very Slightly Included” is the normal range for emeralds. Well over 90% of the emeralds in commerce have been treated to minimize the appearance of the inclusions.

Emerald inclusions pose more than aesthetic considerations, however. Although emeralds, like other beryls, have a high hardness?rating, they’re more fragile than other beryls. (A high Mohs rating doesn’t mean?a stone is indestructible. It simply means the stone is more resistant to scratching). Their inclusions reduce their structural integrity, and these inclusions occur because of how emeralds form under the Earth. They’re unavoidable. Emerald enthusiasts will simply have to treat these gems gently.

The standard industry practice for enhancing emeralds?is oiling. This term refers to the practice of immersing emeralds in a colorless oil or resin. Often this is done using a vacuum chamber to assist penetration. Non-standard treatments go beyond this to using green colored oils and hardened, epoxy-like resins. These treatments dramatically improve the appearance of the gems but necessitate special care in cleaning and setting.

Consumers should learn the pros and cons of emeralds and their treatments before purchasing emerald stones or jewelry.

Stone Sizes

Emerald is notorious for growing very large. The largest emerald crystal extant weighs 16,020 carats and is from the Muzo Mine in Colombia. (The “Bahia Emerald,” discovered in 2001, may take that title). Many museums?around the world display fine and large emeralds, both rough?and faceted gems, as well as some carvings and tumble-polished stones.

  • Smithsonian Institution (Washington, D.C):?117 (green, Colombia); 10.6 (North Carolina); 4.6 (green catseye, Colombia); 858-ct crystal, “the Gachalá.”
  • Moscow:?136 (nearly flawless, deep blue-green, step cut) (in the Diamond Fund).
  • Kurnsthistorisches Museum, Vienna:?2681-ct vase, carved.
  • Topkapi Museum, Istanbul:?6 cm hexagonal crystal; fine 8 cm crystal; 3 other large crystals.
  • Banque Markazi, Teheran:?Many cabochons between 100 and 300 carats; one is 175 carats, another 225. There are also faceted gems of 100 and 110 carats; unmounted cabochons of 320, 303, 144.4, and two others over 250 carats.
  • British Museum of Natural History (London):?“Devonshire Emerald,” a crystal 51 mm. long, weighs 1384 carats, fine color.
  • American Museum of Natural History (New York):?Crystal 1200 carats, fine color, the “Patricia?Emerald;” 630-ct crystal, “the St. Patrick Emerald.”
  • Banco de la Republica, Bogota, Colombia:?collection of superb crystals from 220 to 1796 carats.
  • Private Collection: the?Atahuallpa Emerald,”?45 carats, set in the “Crown of the Andes,”?a magnificent gold headpiece with 453 emeralds totaling 1521 carats. The?Emilia crystal?from Las Cruces Mine (near Gachalá) weighs 7025 carats.

See our article on the world’s largest emeralds for more information.

The Gachalá emerald

The Gachalá emerald, 858 cts, from the Vega de San Juan mine, Colombia, on display at the National Museum of Natural History, Smithsonian Institution. Photo by thisisbossi. Licensed under CC By-SA 2.0.

Emerald Trade Names

Keep in mind that sometimes the following names are used to refer to emeralds from these specific sources. However, they may also be used as trade names to describe emeralds with particular characteristics, regardless of source. If you’re not sure how vendors are using the term, ask them for clarification.

  • Vivid, slightly bluish green stones of medium to medium-dark color are often called “Colombian emeralds” no matter what their actual geographic origin.
  • Emeralds of lighter color are sometimes called “Brazilian,” even if they were mined in Africa.
  • Emeralds less blue and less saturated than Colombians but more included are sometimes called “Russian” or “Siberian,” whether or not they’re from Russia.
  • Small, highly included emeralds with deep color are sometimes called “Sandawana,” even if they’re not from this Zimbabwe locale.
  • Emeralds that tend towards gray are sometimes called “Zambian.”


Emerald rings should have protective settings to shield the gem from physical blows. Emeralds also make excellent choices for pendants, brooches, and earrings.

Mechanical cleaning is not recommended for emeralds. In the worst case, ultrasonic, steam, and boiling methods can shatter emeralds. At the very least, these methods will mean you’ll have to re-oil your emerald. Use only warm water, detergent, and soft brush for cleaning or take your emeralds to a professional jeweler.

For more recommendations, consult our gemstone jewelry care guide.

Art Deco emerald and diamond ring

Platinum Art Deco ring featuring a step-cut emerald with diamond accents. Photo courtesy of liveauctioneers.com and Duane Merrill & Company.

Save 30% vs Retail, Over 1,600 Emeralds in Stock, Free Engraving, Lifetime Warranty.View Emeralds

Ready to learn how to identify gems on your own?

Join our mailing list below to download a FREE gem ID checklist tutorial. See what’s inside…

• Discover the 17 practical steps to gemstone identification (even if you’re just getting started with gemology)

• Learn how you can use specific tools to gather data, make observations & arrive at an accurate ID

• Explore a range of gemological tests… not only will you get familiar with the process but also time-saving shortcuts!